Quick Look
Benefits:
- The look of foil with a soft feel
- Easy to cut and weed
- Holds fine detail
Available In:
20" Wide Rolls
Order Now
Details
User Guide
Videos
Open this ordering wizard full window
Click image to view larger
Material Overview
Add a higher-perceived value to designs with Soft Metallic heat transfer vinyl. This one-step application gives the look of foil with an incredibly soft feel.
- Easy to cut and weed
- Thin and stretchable
- Holds fine detail
- Low-temp application
- Compatible with our Stahls' Rip-Away Appliqué™ Process
- $7.50 Flat Rate Ground Shipping to most areas. Certain exclusions apply.
Material Specifications
- Composition: Polyurethane
- Carrier: Pressure-Sensitive
- Thickness: 63 microns (.063 mm)
- Washability: 50
- Safety: CPSIA Certified
- Laser cutter compatible
- Important: Once handled or laundered, the material takes on a brushed metallic finish.
1-Color Application Instructions
Time:
8-10 seconds
Temperature:
285°F/140°C
Pressure:
Medium
Peel:
Cold
Hotronix® 360 IQ™ Hat Press
Time:
45 seconds
Upper:
280°F
Lower:
320°F
Pressure:
Medium
Peel:
Warm/Cold
Cover Sheet:
Care Instructions
Machine wash cold, inside-out, using mild detergent on delicate setting.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
Cutter Guidelines
Cutter
Blade
Force
Offset
Speed
Graphtec
45°
8-10
0
30cm/s
Roland
45°
60-90g
.25
30cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
How to Heat Press CAD-CUT® Metallic
2021-07-28T20:00:05Z
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Metallic to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure. To order CAD-CUT® Metallic today simply click the link here https://bit.ly/3hDBlk9
Top 3 Reasons to Buy: CAD-CUT® Metallic
2021-04-16T17:15:00Z
Learn about one of the best special effect heat transfer vinyl on the market in CAD-CUT® Metallic. This eye-catching heat transfer material offers a shiny foil-like finish with a softer feel that makes it perfect for fashion wear. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business. To order CAD-CUT® Metallic today simply click the link here https://bit.ly/3a1dJkS