Quick Look
Benefits:
- Lightweight and stretchable
- Gloss finish
- Low temp application
Available In:
20" Wide Rolls
CAD-COLOR® SuperTEK® Gloss Clear Printable Heat Transfer Vinyl
Create a High-Gloss Finish
Order Now
Details
User Guide
Videos
Open this ordering wizard full window
Click image to view larger
Material Overview
With exceptional stretch and rebound properties, this lightweight printable heat transfer vinyl applies at a low temperature so you can decorate difficult fabrics like Lycra®/spandex and nylon without scorching. Cut and apply without printing to achieve a "liquid glass" look.
- Lightweight, stretchable, incredibly soft hand
- Gloss finish
- Low application temperature - safe for sensitive materials
- Apply over a material for tone-on-tone "liquid glass" look
- For white or light fabrics only
- Mask is not needed
- For solvent inks using a print/cut system only—not compatible with inkjet/laser printers
- Compatible with our Stahls' Rip-Away Appliqué™ Process
- $7.50 Flat Rate Ground Shipping to most areas. Certain exclusions apply.
Tip: Protect heat-sensitive garments from imprints and scorching with a Silicone Upper Platen Cover.
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: Frosted, Non-Pressure Sensitive
- Thickness: 50 microns (.05 mm)
- Stretch & Rebound: 5
- Washability: 50
- Color Fastness: 4-5
- Dry Time: 30-60 minutes
- Safety: CPSIA Certified
Application Instructions
Time:
Tack for 5 seconds, peel cold, cover and seal 5 seconds.
Temperature:
280-300°F/ 138-150°C
Pressure:
Medium (#6 on Hotronix)
Heated Lower Platen Application
Upper:
250°F
Lower:
320°F
Time:
12-15 seconds (depending on thickness of garment)
Pressure:
Medium
Print/Cut Instructions
- Print and cut your design in mirrored form on the adhesive side of the roll
- Once dry, weed away excess material
- Position the weeded design in positive form on the garment for heat application
Material/Fabric Compatibility
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Guidelines
Cutter
Blade
Force
Offset
Speed
Roland GX-24
45°
70-90g
.25
30cm/s
Roland VP-300
45°
70-90g
.25
30cm/s
Roland SP-300
45°
70-90g
.25
30cm/s
Roland XC-540
45°
70-90g
.25
30cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
How to Heat Press: CAD-COLOR® SuperTEK® Gloss Clear
2021-08-18T20:00:00Z
Learn the step-by-step instructions of how to properly heat press CAD-COLOR® SuperTEK® Gloss Clear to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this special custom logo product and the proper time, temperature, and pressure. To order CAD-COLOR® SuperTEK® Gloss Clear today simply click the link here https://bit.ly/3xgLk3n
Top 3 Reasons to Buy: CAD-COLOR® SuperTEK® Clear Gloss
2021-07-16T18:00:01Z
Learn about one of the best full color heat transfer materials on the market in CAD-COLOR® SuperTEK® Clear Gloss. This eye-catching heat transfer material offers you the ability to get exceptional stretch and rebound properties. This lightweight printable heat transfer vinyl applies at a low temperature so you can decorate difficult fabrics like Lycra®/spandex and nylon without scorching. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business. To order CAD-COLOR® SuperTEK® Clear Gloss today simply click the link here